Youtube Link to Exstreamer Setup

Barix Exstreamer – Affiliate Setup

Discovery Tool

The Barix Discovery Tool is a Java application to find your Barix Devices on the local network. It helps you identify the IP-Address of any Barix Device based on their MAC-Address, which you can find on the backside of the device. It can even find devices when they have no or wrong IP address settings and allows even to set the IP address.

Prerequisites:

  • Java Runtime Environment Installed
  • make sure Windows firewall does not block traffic (UDP port 30718)
  • Barix devices with a firmware not older than 2012
  • detects Barix devices only in the same local LAN

SETTING UP A BARIX EXTREAMER 500

  1. Plug in an ethernet cable to the Barix box
  2. Locate the ‘Discovery Tool’
  3. Open Discovery Tool and click ‘SEARCH’
  4. Select the Barix Box that you are working on (probably the bottom one in the list)
  5. Open Barix Box ‘in a web browser’
    1. Click UPDATE
    1. START UPDATE
    1. (Device reboots)
  6. Locate the ‘compound.bin’ file (firmware file for audio streamer)
  7. Drag and drop the compound.bin file onto the ‘CHOOSE FILE’ button on in the web browser
  8. UPLOAD
  9. Once successful – Click the upload link once then click ‘REBOOT’
  10. Reload the web page with the IP address and port only (or maybe just the IP)
  11. Should see a page with a picture of a remote control
  12. Click CONFIGURATION
      1. 1 URL – TBD
    ETC
  13. Volume to 80
  14. Apply
  15. Advanced Settings/Security
  16. Set Password to : (your choice)
  17. Apply
  18. May see a box appear asking for a login: leave username blank and password is: (your choice)
  19. All 0’s in the Network box

Check Discovery Tool for a final time